Torno Geminis Modelo CNC 4 Plus 720  x 2000mm e.p con cnc Fagor 8055 BT,  ,diametro admitido sobre bancada 720 mm

Lathe Gurutzpe Super BT 700 x 6000mm e.p,turning on bench 1380mm,on transverse carriage 1045mm,on neckline 1770mm,length of neckline before Chuck 620mm,shaft hole 102mm,speeds 2,8-400rpm,motor 30cv,chuck of 4 independent claws of diameter 1400mm, with fixed steady and a mobile, wide bench 800mm, diameter of the axis of the counterpoint 140mm, weight max on lathes between points 10tns with a lunette 12tns, estimated weight of the lathe 17600kg, pre-owned electric panel, lathe in very good condition

Torno Geminis modelo GE 1200 S con 4000mm entre puntos, dispone de parte mecánica para ampliar a 5m entre puntos, con  visualizador nuevo de cotas Fago

Cazeneuve lathe, model HB 810 of 5000mm e.p. with Fagor height display, rectified cross slide and charriot, max diameter on bed 810 mm, max diameter on cross slide 500mm, shank hole 81mm, 18 speeds from 16rpm to 1250rpm. longitudinal slide movements with rapid advances, new stainless steel Chuck 315mm diameter, with fixed and mobile steady rests with 4-jaw chuck. With 4-jaw independent 500mm diameter chuck                                                                                   

Pinacho Lathe mod S90 310 x 3150mm e.p , diameter admitted on bed 650mm, on neck 850mm, on transverse carriage 420mm, shaft hole 80mm, speeds 30-1500rpm, bed width 350mm, 7.5hp motor, with protections, in very good condition

Torno Amutio Cazeneuve modelo HB 725 de 1000mm entre puntos,volteo sobre bancada 725mm,volteo sobre carro 500mm,volteo sobre escote 900mm, longitud del escote 310mm,velocidades de 16-1250rpm,diametro de la caña 81mm ,tiene luneta fija ,lleva montado plato 3 garras diametro 315mm,accesorios:lleva otro plato universal de 400mm de  3 garras ,,con visualizador de cotas, en buen estado .pintura original 

01.01.0400 Gurutzpe Super BT lathe 800 x 2000mm e.p, with dimension display, turning on bed 1580mm, on cross slide 1100mm, on the neckline 1950mm, length of the neckline before the plate 620mm, shank hole 102mm, 36 speeds 2.8-400rpm , 30hp motor, 4-jaw independent chuck with diameter 1400mm, bed width 800mm, tailstock axis diameter 180mm, lathe with dimension display, maximum weight on lathes between points 10tns , estimated weight of the lathe and tooling 14550kg

Geminis lathe model GE 870 with 2000mm between tips, turn on bed 870mm, turn on cross slide 580mm, turn on neck 1100mm, neck length 340mm, speeds of 13-1000rpm, shank hole diameter 84mm, 3-claw plate mounted diameter 315mm, has a plate with 4 independent claws of 500mm diameter, has a fixed and mobile bezel, quick change turret, new Fagor dimension indicator, lathe in general in very good condition

GURUTZPE lathe model Super AT 500/4000, with Fagor dimension display

Gurutzpe Super BT lathe 600 x 4000mm + 1000mm e.p

Torno Amutio cazeneuve Modelo HB 500 de 1000mm e.

01.01.0430 Torno Amutio Cazeneuve modelo HB 725 de 2000mm entre puntos

Pinacho Smart Turn 5/310-155 x 1000mm e.p lathe with Fanuc

01.01.0404 Torno Jashone modelo M 215-260-E de distancia entre puntos 2000mm, con visualizador de cotas Fagor,volteo sobre bancada 520mm, volteo sobre escote 710 mm, volteo sobre carro 320 mm,agujero de la caña 104mm, torreta de cambio rapido , 12 velocidades de 23 a 1000rpm  , torno en general en muy  buen estado

Torno Geminis SCNC 680  x 2000mm e.p con cnc Fagor 8025 TG-,servomotores Yaskawa, preparado para llevar plato hidraulico , el sistema es hueco con lo cual permite alimentar barra por detras ,diametro admitido sobre bancada 700mm,sobre  escote 850mm,sobre carro transversal 400mm,agujero de la caña 84mm, velocidades 0-1000rpm,avances rapidos longitudinales max 10m/min,avances rapidos transversales max 8m/min,avances de trabajo longitudinal de 1-4000mm/min ,avances de trabajo transversal de 1-2000mm/min,avances rapidos 0-10mpm,diametro del contrapunto 100mm,curso de la caña hidraulica 140mm,morse 5,peso max entre puntos 2500kg,con 1 luneta 3150kg,potencia 22Kw,peso 6tns, con extractor de virutas, el torno tiene luneta fija y movil, pero hay que adaptar , torno en muy buen estado 

Torno Pinacho modelo S90  180 x 1100mm e.p,diametro admitido sobre bancada 360mm

Pinacho lathe model S90 260 with 2150m between points, with Fagor dimension display ,

Torno Pinacho modelo S90 310 x 2150mm e.p,diametro admitido sobre bancada 650mm

01.01.0357 Torno Pinacho modelo S90 310 x 1600mm e.p,diametro admitido sobre bancada 650mm,sobre escote 850mm,sobre carro transversal 420mm,agujero de la caña 80mm, velocidades 21-1100rpm,motor de 7,5cv,,con torreta de cambio rapido,con luneta , en buen estado

01.01.0392 Torno Pinacho modelo L8/260 de 3200mts entre puntos ,diametro sobre bancada 520mm, diametro sobre escote 770mm ,diametro sobre carro transversal 325mm,torno muy completo para hacer roscas, metrico, whitword ,modulares y paso pitch,, agujero de la caña 68mm motor 7,5cv,torreta de cambio rapido , luneta  ,plato de 4 garras universal, torno en buen Estado

01.01.0354Torno Pinacho modelo S90 E 230 x 1600mm e.p,diametro admitido sobre bancada 450mm,sobre escote 550mm,sobre carro transversal 220mm,agujero de la caña 52mm, velocidades 21-2200rpm,motor de 5,5cv,, con luneta,cambiados los dos embragues y los rodamientos principales de la caña o brocha, torno en  buen estado

Torno Pinacho modelo L1  180 x 1100mm e.p,diametro admitido sobre bancada 360mm

Pinacho lathe model L1 225 x 1600mm e.p, diameter admitted on bed 450mm, on neckline 690mm, on cross slide 215mm, quill hole 52mm, 18 speeds 32-1800rpm, 5.5hp motor, with steady rest, with quick change turret, with various accessories, lathe in good condition

01.01.0391 Torno Pinacho modelo Latino  L1/260 de 3150mm entre puntos ,diametro sobre bancada 520mm, diametro sobre escote 770mm ,diametro sobre carro transversal 325mm,torno muy completo para hacer roscas, metrico, whitword ,modulares y paso pitch,, agujero de la caña 68mm motor 7,5cv,torreta de cambio rapido , luneta  ,plato de 4 garras universal, torno en buen Estado

01.01.0408 Torno Pinacho modelo Latino  L1/260 de 1600mts entre puntos ,diametro sobre bancada 520mm, diametro sobre escote 770mm ,diametro sobre carro transversal 325mm,torno muy completo para hacer roscas, metrico, whitword ,modulares y paso pitch,, agujero de la caña 68mm motor 7,5cv,torreta de cambio rapido , luneta  ,plato de 4 garras universal, torno en buen Estado

Pinacho lathe model L1 225 x 1600mm e.p, diameter admitted on bed 450mm, on neckline 690mm, on cross slide 215mm, quill hole 52mm, 18 speeds 32-1800rpm, 5.5hp motor, with steady rest, with quick change turret, with various accessories, lathe in good condition

01.01.0436 Torno Pinacho modelo Lince  L8 225 x 750mm e.p, diametro admitido sobre bancada 450mm,sobre carro transversal 215mm,agujero de la caña 52mm,18 velocidades 38-2200rpm,anchura bancada 300mm,con proteccion encima plato ,  en muy buen estado

01.01.0409 Torno Pinacho modelo A75 x 1100mm e.p, diametro admitido sobre bancada 400mm,sobre escote 620mm,sobre carro transversal 220mm,agujero de la caña 42mm, velocidades 27-1800rpm,motor de 4cv,torno con protecciones,  torno en  buen estado

Torno Gurutzpe Super M 300 x 1000mm e.p,con visualizador de cotas fago

01.01.0441 Torno Heller modelo CE 500  x 2000mm e.p,diametro admitido sobre bancada 500mm

01.01.0373 Torno Lacfer modelo C-R-2E-250 x 1,5mts e.p 16 velocidades(18-1600 rpm),agujero de la caña 60mm volteo sobre bancada 530mm,volteo sobreescote 740mm,volteo sobre carro 320mm, carro con topes longitudinales,10cv, plato de 3 garras de diametro 250mm,con luneta, con torreta de cambio rapido y varios, buen estado 

Echea lathe model AII of 5000mm e.p diameter over bed 750mm, over neckline 1050mm

01.01.0399 Torno Vertical TOS modelo SK 12 A ,motor principal skoda 37Kw ,diametro del plato 1250mm,diametro maximo a tornear en carro derecho 1540mm ,altura de trabajo  1100mm,peso max de la pza a tornear 4000kg,1 carro con torreta de 3 posiciones, 1 carro vertical con inclinacion 45ºincluye la visualizacion de la inclinacion de los grados ,peso del torno 20 tns,

Lacfer lathe model CR2E 250 x 1500mm  speeds (18-1600 rpm), shaft hole 60mm, turning on bed 530mm, turning on carriage 320mm, carriage with longitudinal stops, 10hp, 3-claw plate with diameter 250mm, with rear window, with quick change turret and various, very good condition

01.01.0398 Torno Echea  de 4000mm e.p diametro sobre bancada 850mm,sobre escote 1080mm, sobre carro 580mm,diametro del agujero de la caña 85mm,12 rpm del motor desde 8-800rpm luego lleva motoreductor para 24 velocidades bajas desde 0,8 a 50rpm, lleva montado   plato de 500 universal autocentrante  y plato de garras independientes de 600mm, con  luneta fija y movil en general en buen estado ,  

H. Ernault Somua lathe, Cholet 550 model, 1,600 mm distance between points

Torno Geminis modelo GE 870 de 2000mm entre puntos,volteo sobre bancada 870mm

01.01.0374 Torno Satesa , modelo STL RE  x 4000mm e.p,diametro a tornear sobre bancada 620mm , sobre carro 370mm sobre escote 800mm,18-1600rpm,agujero de la caña 62mm ,con visualizador de cotas, con lunetas, con diferentes platos torno en buen estado

Lathe Jashone modelo M 190 -M de 1000mm e.p con agujero de caña 52mm, volteo sobre bancada 350mm, 5,5cv, con torreta de cambio rapido.

 ZUBAL lathe type C 1  x 1000mm e.p,diametro a tornear sobre bancada 360mm , sobre carro210mm sobre escote 520mm,42-2240rpm,agujero de la caña 32mm , , con  plato univ  de 3 garras montado ,torno en buen estado 

01.01.0367 Torno Torrent T71/68 x 1,6mts entre puntos,con visualizador de cotas Fagor , volteo sobre bancada 500mm, sobre escote 760mm,300mm sobre carro,agujero de la caña 68mm,24-1300 rpm,5,5cv , falta sistema de roscado , en general en buen estado 

Torno Cumbre modelo 024  de 1500mm e.p, Conectado a 220 Monofasico, incluye variador ,diametro sobre bancada 450mm, diametro sobre carro 280mm agujero caña 42mm,con luneta .

Geminis lathe model 1200 S 3G with 6000mm between points, turning on bed 1200mm, turning on cross slide 1050mm, speed range 3.5-710 rpm, main motor 30Kw, shaft hole diameter 104mm, carriage travel transversal 650mm, tool carriage travel 320mm, bed width 1150mm, has 3 fixed steady rests, has a plate with 4 independent jaws with a diameter of 1200mm, tailstock shaft diameter 210mm, built-in rotating point, tailstock, allowable weight between points 16000kg, with a 20tns steady rest, in the air with a center of gravity of 315mm 3150kg, weight of the lathe with accessories 20000kg, lathe in very good condition

01.01.0397 GURUTZPE lathe , model  Super A ,6,000 mm between points, turning on 1020mm bed, on mm 710 mm carriage, shank Hole diameter 320 mm, 16 speeds from 9-500rpm, has two Chuck mounted, one of 900mm with 4 independent jaws and on the back The rear has a self-centering universal 3-claw mounted Chuck with a diameter of 700mm, it has fixed steady rests and a support with rest to mount on top.very good condition

GURUTZPE lathe model Super A 8000/800, 8000 mm between points, with Heindenhain dimension display, turning on bed 820mm, turning on neckline 1150mm, on carriage 550mm, shank Holer diameter 250 mm, 16 speeds from 9-500rpm, It has a 600mm three-claw universal chuck mounted and on the back it is prepared to mount a second chuck, it has 3 fixed steadys and a Heindenhain dimension display. good condition .

COER-PG lathe model MC 660 x 1500mm e.p, quill hole255mm

01.01.0233 Lathe Gurutzpe Super BT 800 x 4000mm ep, made in Spain,with Fagor dimension display, turn on bench 1650mm, turn on cross car 1100mm, on the gap 1950mm, length of neckline before plate 620mm, spindle bore 102mm, speeds 2.8- 400rpm, 40cv engine, plate of 4 independent claws with a diameter of 1400mm, and steady rest, bench width 800mm, shaft diameter of the tailstock 140mm, lathe with display of dimensions Fagor, max weight on lathes between 10tns points with a 12tns window, estimated weight of lathe and tooling 16250kg

Pinacho CNC Lathe Model Smart Turn 7-200 x 1500mm e.p with Fanuc CNC  OI Mate -TC,diameter on bed 400mm,shank hole 65 mm,year 2008, in very good condition

Geminis lathe model CNC 7 PLUS-1100-2G of 6000mm between points, lathe with cnc Fagor 8055 A/T, with tool clamping system type turning over bed 1100mm, turning over cross slide 740mm, range of speeds continuous variation 0-800 rpm range 1/ 2.8-90rpm, range 2 5.6-180rpm, range 3/ 11.2-355rpm, range 4/ 22.4-710rpm, main motor 42Kw, work progress Longitudinal travel 0-8000 mm/min, work advances transversal travel 0-2000 mm/min, longitudinal rapids 8m/min, transversal rapids 6m/min, shank hole diameter 162mm, cross slide travel 600mm, slide travel 320mm tool holder, 1150mm bench width, has 2 fixed steady rests, has a 1000mm diameter chuck with 4 independent jaws, has another 600mm diameter chuck, 210mm tailstock shank diameter, built-in rotating point, motorized tailstock, permissible weight between points 10000kg, with a steady rest 12500kg with 2 steady rests 15600kg, in the air with a center of gravity of 280mm 2400kg, weight of the lathe with accessories 16500kg, total installed power 72KW, lathe in very good condition, with chip extractor, Year of manufacture 1997, machine number 5896.

Torno Geminis modelo GE 870 de 5000mm entre puntos,diametro del agujero de la caña 162mm ,con salida posterior del cabezal ,con visualizador de cotas fagor, volteo sobre bancada 870mm,volteo sobre carro transversal 580mm,volteo sobre escote 1100mm, longitud del escote 340mm,velocidades de 13-750rpm, ,lleva montado plato 3 garras diametro 500mm con agujero 190mm ,lleva plato 4 garras independientes de diametro 700 mm agujero 250m ,lleva luneta fija,y movil, potencia motor 15cv,torno en muy muy buen estado ,semi nuevo

Torno Geminis modelo GE 1200 3G CNC de 6000mm entre puntos,,torno con cnc Fagor 8055 T Plus ,torreta cuadrada automatica sauter con 4 portaherramientas, volteo sobre bancada 1200mm,volteo sobre carro transversal 950mm,, gama de velocidades variacion continua 2,8-710 rpm gama 1/ 2,8-90rpm, gama 2 5,6-180rpm , gama 3/ 11,2-355rpm,gama 4/ 22,4-710rpm,avances de trabajo recorridos longitudinal 0-4000 mm/min,avances de trabajo recorridos transversal 0-2000 mm/min, rapidos longitudinal 8m/min , rapidos transversal 6m/min , diametro del agujero de la caña 104mm ,recorrido del carro transversal 600mm,recorrido del carro portherramientas 320mm,,anchura de la bancada 1150mm,tiene 2 luneta fija ,lleva montado plato de 4 garras independientes de diametro 1200mm,tiene otro plato universal de diametro 500mm ,motor principal 60cv,diametro caña contrapunto 210mm , punto giratorio incorporado, contrapunto motorizado, peso admisible entre puntos 16000kg, con una luneta 20tns con 2lunetas 25tns ,al aire con centro de gravedad de 315mm 3150kg ,peso del torno con accesorios 21000kg ,torno en buen estado

Geminis lathe model GE 1200 S, turning on bench 1260mm, turning on the gap 1600mm turn over cross slide 870mm, 22 speeds of 3.5-280rpm, diameter of the hole 520mm, travel of the cross slide 600mm, travel of the carriage tool 320mm, this lathe also has the possibility of putting the ideal chariot for cones in automatic, it also has a device for copying cones, carriage displacement with rapids, width of the bed 850mm, it has mounted plate independent claws of diameter 1200mm, 30kw, with turret of rapid change, with display of dimensions, weight of the winch 11.500kg more accessories, lathe in general in good condition, ideal for the oil industry and hydraulic cylinders.

All information without guarantee. A demonstration is possible at any time in our showroom. The ad was translated automatically and it is possible that some translation errors have occurred.

01.01.0102. Geminis lathe model GE 650 with 2000mm between points, with NEW Fagor display, turning on bed 680mm, turning on carriage 410mm, turning on neckline 850mm, length of neckline 310mm, speeds of 16-1250rpm, shaft diameter 84mm, has fixed steady rest It has a 3-claw chuck with a diameter of 3100 mm and a 4-claw chuck with a diameter of 500 mm. In general, the lathe is in very good condition.

Pinacho lathe model SE 325 x 2000mm e.p cnc Fagor 8037T, diameter admitted over bed 652mm, cross slide 450mm, shank hole 80mm, speeds 0-1700rpm, work feed rate 0-5000mm/min, 10cv motor, with Automatic turret with 8 positions, year 2017, semi new

01.01.0381 Torno Pinacho modelo S90 310 x 3250mm e.p,con visualizador de cotas, diametro admitido sobre bancada 650mm,sobre escote 850mm,sobre carro transversal 420mm,agujero de la caña 80mm, velocidades 30-1500rpm,motor de 7,5cv, con protecciones , en muy buen estado 

Pinacho Taurus 310 / 105 x 2000mm e.p lathe with Fanuc model O 21 cnc, diameter admitted on bed 620mm, on cross slide 415mm, shaft hole 105mm, 2 speed ranges 0-625rpm/625-2500rpm, with 8-inch Duplomatic hydraulic turret  8 positions, working advances of 0-7000mmpm, rapid advances 0-10mpm, . It has a steady, year 2002 in good condition

01.01.0434 Torno Pinacho modelo S90 310 x 3150mm e.p, diametro admitido sobre bancada 650mm,sobre escote 850mm,sobre carro transversal 420mm,agujero de la caña 80mm, velocidades 30-1500rpm,anchura bancada 350mm,motor de 7,5cv, con protecciones , en muy buen estado